A PRELIMINARY INVESTIGATION INTO THE USE OF ACID-TOLERANT PRECIPITATED CALCIUM CARBONATE FILLERS IN PAPERMAKING OF DEINKED PULP DERIVED FROM RECYCLED NEWSPAPER

Jing Shen, Zhanqian Song, Xueren Qian, Wenxia Liu

Abstract


The use of acid-tolerant precipitated calcium carbonate fillers, including phosphoric acid/sodium hexametaphosphate modified precipitated CaCO3 filler, and sodium silicate/phosphoric acid/sodium hexametaphos-phate modified precipitated CaCO3 filler in papermaking of deinked pulp derived from recycled newspaper was explored. These two acid-tolerant fillers provided considerably more brightness improvement in papers in comparison the unmodified filler, presumably indicating alleviated pulp darkening achieved as a result of better acid-resistant properties. The addition of acid-tolerant fillers into the furnish slurries gave lower system pH as compared with unmodified filler. Among the three fillers used in this work, the effect on retention of modification of the filler with sodium silicate/phosphoric acid/sodium hexametaphosphate was probably the best, as evaluated from ash content measurements. For air permeability of the paper, the use of acid-tolerant fillers provided slightly more improvement in comparison to the unmodified filler. For tensile and burst strength of the paper, the use of sodium silicate/phosphoric acid/sodium hexameta-phosphate modified precipitated calcium carbonate filler gave better results as compared with the other two fillers. Additionally, the improving effect of acid-tolerant fillers on furnish static drainage was found to be slightly weaker than that of unmodified filler.

Keywords


cid-tolerant precipitated calcium carbonate filler; Papermaking; Deinked pulp; Optical properties; pH profile; Strength properties; Air permeability; Ash content; Furnish static drainage

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126