AN EXPLORATORY STUDY ON THE REMOVAL OF ACETIC AND FORMIC ACIDS FROM BIO-OIL

Badmakhand Sukhbataar, Philip H. Steele, Leonard L. Ingram, Moon G. Kim

Abstract


Bio-oil produced from fast pyrolysis of biomass contains various levels of acetic and formic acids derived from breakdown of cellulose and hemi-cellulose components. Removal of these organic acids from bio-oil was investigated for use as industrial chemicals as well as to improve the quality of recovered bio-oil as fuel in various applications. Calcium oxide and a quaternary ammonium anion-exchange resin were used to form acid salts of the organic acids, which were then separated, and the organic acids were generated by reacting with sulfuric acid. Both methods were found to be effective in limited ways and various difficulties encountered in this approach are discussed.

Keywords


Bio-oil; Pyrolysis of wood; Acetic acid; Formic acid; Prolytic lignin

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126