CHARACTERIZATION AND PROPERTIES OF A LIGNOSULFONATE-BASED PHENOLIC FOAM

Lihong Hu, Yonghong Zhou, Meng Zhang, Ruijie Liu

Abstract


Phenolated lignosulfonate was introduced into the synthesis of phenolic resol with phenol and formaldehyde in an alkaline condition. The modified resol was successfully applied to prepare phenolic foam using appropriate combinations of flowing agents. N-pentane was found to be suitable as the foaming agent. Sulphuric acid (50% aqueous solution, w/w) and Tween-80 were used as catalyst and surfactant, respectively. The obtained foams were characterized by thermogravimetric analysis (TGA), scanning electron microscopy (SEM), friability, and mechanical property tests. The experimental results showed the foam to have lower density, better toughness, and excellent thermal insulation compared to those of foams obtained from conventional resol resin. The properties of phenolated lignosulfonate modified phenolic foam can comply with the required specifications for its practical utilization.

Keywords


Phenolated; Lignosulfonate; Phenolic foam; Characterization; Properties

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126