SUBSTITUTION OF HIGH-YIELD-PULP FOR HARDWOOD BLEACHED KRAFT PULP IN PAPER PRODUCTION AND ITS EFFECT ON ALKENYL SUCCINIC ANHYDRIDE SIZING

Qijie Chen, Yonghao Ni, Zhibin He

Abstract


In recent years there has been an increasing interest in using high-yield pulp (HYP) as a partial replacement for hardwood bleached kraft pulp (HWBKP) in the production of high-quality fine papers as a cost-effective way of improving the product performance. This study investigated the substitution of HYP for HWBKP and its effect on the Alkenyl Succinic Anhydride (ASA) sizing performance. The results showed that the substitution of an aspen HYP for HWBKP can increase the ASA sizing performance at a HYP substitution as high as 15 to 20%. The ASA addition sequence has an influence on the ASA sizing performance and first adding ASA to the HYP followed by mixing with kraft pulps was the preferred method. Using precipitated calcium carbonate (PCC) as a paper filler at a dosage of less than 20% can increase the ASA sizing performance due to the contribution of the calcium soap of the hydrolysed ASA. A PCC dosage greater than 20% resulted in a negative impact on the sizing performance. It was also found that different PCC loading sequences can also affect the ASA sizing performance.

Keywords


ASA sizing; High-yield pulp (HYP); Bleached chemi-thermomechanical pulp (BCTMP); Fine paper; Precipitated calcium carbonate (PCC)

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126