USE OF A VOITH FLOTATION CELL FOR REMOVAL OF LIPOPHILIC EXTRACTIVES AND Mn IONS FROM SPRUCE THERMOMECHANICAL PULPING PROCESS WATERS

Dariusz Zasadowski, Erik Hedenström, Håkan Edlund, Magnus Norgren

Abstract


The effects of a chelating surfactant and different foaming agents on the efficiency of cleaning process waters from a thermomechanical pulp (TMP) mill were studied in a Voith flotation cell. Turbidity measurements and gas chromatography were used to determine the removal extent and characteristics of dissolved and colloidal substances (DisCo). The metal ion content in the process waters before flotation and the metal chelate removal after flotation were determined using inductively coupled plasma-optical emission spectrometry (ICP-OES). FiberLab™ equipment was used to characterize changes in the size of fibers present in the process waters. The results indicate that a decrease in turbidity of up to 91% and the removal of 80% of lipophilic extractives in the TMP water could be obtained using a single-stage flotation unit. Furthermore, the foam fraction was within 5% of the initial volume, and 100% of the Mn2+/chelating surfactant complex added to the TMP water was removed.

Keywords


Flotation; Extractives; Foaming agents; Chelating surfactant; Purification; Internal cleaning stage

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126