THE INFLUENCE OF PULP REFINING ON DE-INKING POTENTIAL AND STRENGTH PROPERTIES OF INK JET PRINTED PAPER

Seyed Ali Haji Mirza Tayeb, Ahmad Jahan Latibari, Ajang Tajdini, Seyed Mohamad Javad Sepidehdam

Abstract


The effect of laboratory refining on de-inking potential of inkjet printed handsheets was investigated. Pulp samples containing 80% short fiber and 20% long fiber were beaten in a PFI mill to reach four predetermined freeness levels of 650 (unrefined), 550, 430, and 340 mL CSF, and then handsheets were made. Handsheets were identically inkjet printed and then de-inked. Results revealed that, at lower freeness value, the brightness of de-inked pulps was higher, but the opacity decreased. The surface roughness of handsheets produced using different refined pulp before de-inking was reduced. Our results showed that refining will impart a positive effect on handsheets’ de-inking potential, and de-inking printed papers produced from pulps refined to lower freeness generated the highest brightness. The results revealed that both tensile and tear strength indices of de-inked pulp were lower. However, the tear strength index of unrefined sample and the tensile strength index of pulp refined to 430 ml CSF were higher than for undeinked samples.

Keywords


Refining; De-inking; Roughness; Brightness; Opacity; Strength

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126