OPTIMIZATION OF ECF BLEACHING AND REFINING OF KRAFT PULPING FROM OLIVE TREE PRUNING

Ana Requejo, Alejandro Rodríguez, Jorge L. Colodette, José L. Gomide, Luis Jiménez

Abstract


The aim of the present work was to find an optimum kraft pulping process for olive tree pruning (OTP) in order to produce a bleachable grade pulp of Kappa number about 17. The kraft pulp produced under optimized conditions showed a viscosity of 31.5 mPa.s and good physical, mechanical, and optical properties, which are acceptable for paper grade production. The strength and optical properties were measured on pulps unrefined and refined in a PFI mill with up to 2000 revolutions before and after bleaching. The OTP pulp was bleached to 90% ISO brightness (kappa < 1); however the process demanded a long sequence of stages, OD(EP)D(EP)D, and a higher than usual total chemical dosage (24.78 kg/odt pulp). Overall, OTP is suggested as an interesting raw material for cellulosic pulp production because its properties are comparable to those of other agricultural residues currently used in the paper industry.

Keywords


Kraft pulping; Olea europaea; Agricultural wastes; Refining, ECF bleaching

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126