IDENTIFYING APPROPRIATE CONDITIONS FOR PRODUCING SPINDLE-LIKE CAUSTICIZING PRECIPITATED CALCIUM CARBONATE FOR PAPER FILLER APPLICATIONS

Jin Wang, Peng Wei, Peng Liu, Wei Sun

Abstract


Causticizing precipitated calcium carbonate (CPCC) as a by-product of the green liquor causticizing process can be used as paper filler to save resources and reduce costs. In this study, CPCC was prepared with green liquor and quicklime, which were obtained from an alkali recovery line of a paper mill. The factors influencing crystal morphology of CPCC, such as slaking temperature, slaking time, and causticizing time were investigated. The morphology of CPCC was observed and analyzed for optimizing reaction conditions. The following were compared: properties of CPCC obtained in this study, conventional CPCC (white mud) from a paper mill, and commercial PCC as fillers. The results showed that slaking time and causticizing time were important for morphology control. Spindle-like and rod-like CPCC obtained in this study had better drainability and retention, higher paper bulk, opacity, and physical strength compared to conventional CPCC, and had nearly the same performances as commercial PCC.

Keywords


Precipitated calcium carbonate; Causticizing; Slaking; Crystal morphology

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126