Preparation and Characterization of Palm Kernel Shell/Polypropylene Biocomposites and their Hybrid Composites with Nanosilica

Muhammad Safwan Mohaiyiddin, Lin Hui Ong, Hazizan Md. Akil

Abstract


Hybrid composites are characterized by a variety of properties that are of interest to automotive applications, including strength, mechanical, and thermal properties. In this work, palm kernel shell-filled maleated polypropylene composites and palm kernel shell/nanosilica-filled maleated polypropylene hybrid composites were produced using a Brabender Internal Mixer. The results showed that the usage of the two types of filler in the PP matrix enhanced the tensile strength, elongation at break, and impact strength but reduced the tensile modulus of the PP composites. Thermal studies confirmed that the improved nucleating ability of the hybrid fillers contributed to the superb mechanical properties of the hybrid composites. A lower percentage of water absorption was observed in hybrid composites compared to the palm kernel shell/PP composite system.

Keywords


Palm Kernel Shell; Nanosilica; Polypropylene; Hybrid; Biocomposites

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126