Effect of Thermal Ageing on the Gloss and the Adhesion Strength of the Wood Varnish Layers

Zafer Demirci, Abdullah Sonmez, Mehmet Budakçı

Abstract


The present study investigated the effect of thermal ageing of several wood varnishes on film characteristics. For this purpose, alkyd, two-part polyurethane (urethane-alkyd), and water-borne (self-cross-linked polyurethane) varnishes were applied on Scots pine (Pinus sylvestris L.), Eastern beech (Fagus orientalis L.), and sessile oak (Quercus petraea L.). The test samples had 8% or 12% moisture content. The samples were then thermally aged for 25, 50, 75, and 100 days at 25, 50, 75, and 100°C. The decrease in adhesion strength of the varnish layers and the loss in surface gloss were determined in accordance with the ISO 4624 and ISO 2813 standards. The results of the study indicated that thermal ageing caused a decrease in the adhesion strength and gloss values.

Keywords


Wood materials; Moisture content; Wood varnishes; Thermal ageing; Adhesion strength; Gloss

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126