Improved Fluorescence of Carbon Dots Prepared from Bagasse under Alkaline Hydrothermal Conditions

Xiao-Juan Liu, Ming-Lin Guo, Juan Huang, Xue-Yan Yin

Abstract


A simple and effective route to improve the fluorescence of carbon dots is reported. A weak fluorescent solution was obtained by a diminution step to obtain tiny particles from bagasse-based carbonaceous blocks. This solution was subjected to hydrothermal treatment under alkaline conditions to improve its fluorescent performance. The luminescence was found to be improved by more than 20-fold after hydrothermal treatment. The ultraviolet absorption and the surface structure were also significantly changed. The alkaline hydrothermal process was shown to involves hydrolysis, isomerization, dehydration, and polymerization that causes the formation of the C=C double bonds and conjugated structures. The optimum hydrothermal conditions were at 200 °C for 8 h, and the most appropriate ratio of NaOH to the amount of the weak fluorescent solution was 38-40 mg to 1 mL.

Keywords


Fluorescent carbon dots; Bagasse; Sodium hydroxide; Hydrothermal

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126