A Review of Wood Machining Literature with a Special Focus on Sawing

Andrew Naylor, Phil Hackney

Abstract


In this review, fundamental wood machining research is evaluated to determine the general cutting mechanics of simple, orthogonal, and oblique cutting tools. Simple tool force trends and chip formation characteristics are indentified here, along with the cause and effects of tool wear. In addition to this, specific methods of evaluating sawing processes have been investigated. These include the use of piezoelectric dynamometers to record tool forces and high speed photography to evaluate chip formation. Furthermore, regression analysis has been previously used to identify tool force trends with respect to both tooth geometry parameters and work-piece properties. This review has identified the original findings of previous research. This will allow for further original research to be conducted.

Keywords


Wood Machining; Tool Forces; Tool Wear; Sawing

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126