Flocculation Performance of Trimethyl Quaternary Ammonium Salt of Lignin-Sodium Alginate Polyampholyte

Qiong Zhang, Di Wang, Ying Bei, Shixue Ren, Guizhen Fang

Abstract


In order to improve the molecular weight and application of a lignin byproduct, the trimethyl quaternary ammonium salt of lignin-sodium alginate polyampholyte (QL-SA) was prepared with trimethyl quaternary ammonium salt of lignin (QL) and sodium alginate (SA), using the cross-linker glutaraldehyde. Its structure was analyzed by FTIR, SEM, and analysis of nitrogen and carboxylic contents. Results showed that QL and SA were grafted successfully. The nitrogen content was diminished from 4.21% to 3.69% and its carboxyl content increased from 2.66 mmol/g to 6.47 mmol/g. The product behaved as flocculant by electrostatic interactions and bridging actions. The effects of QL-SA on the flocculation performance of dyes were investigated with methylene blue and acid black ATT water as the representative dyes. The maximum decolorization rate of acid black ATT was 94.91% and methylene blue was 97.11% under the corresponding optimal conditions (5 g/L of the flocculant at pH 3, 30 °C, and 8 g/L at pH 8, 30 °C). The effect of QL-SA was found to be markedly superior to SA and QL on the whole. The QL-SA showed promise for practical applications.

Keywords


Trimethyl quaternary ammonium salt of lignin (QL); Sodium alginate (SA); Polyampholyte; Flocculation

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126