Measurements of Thermal and Dielectric Properties of Medium Density Fiberboard with Different Moisture Contents

Jianhui Zhou, Haibin Zhou, Chuanshuang Hu, Shuofei Hu

Abstract


The thermal and dielectric properties of medium density fiberboard (MDF) with different moisture contents were measured by light flash and the parallel-plane capacitor method, respectively. The results show that increasing moisture content has a positive effect on both thermal properties and dielectric properties. The higher the moisture content, the higher the thermal conductivity and dielectric properties were. The thermal conductivity of MDF with different moisture contents varies in the temperature range of 25 to 150 ºC in a double-hump pattern rather than a proportional pattern. The dielectric constant decreases with increasing frequency up to 1000 MHz. The dielectric loss factor undulates within the frequency range of 1 to 100 MHz, and the peak value occurs at around 10 MHz. The results presented in this study can be used for radio frequency heating, wood building energy, material design, and radio frequency evaluation.

Keywords


Moisture content; Thermal properties; Dielectric properties; Temperature dependence; Frequency dependence

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126