Two-Stage Fractionation of Hardwoods

Mehmet Sefik Tunc, Juben Chheda, Evert van der Heide, Jerry Morris, Adriaan van Heiningen

Abstract


A two-stage lignocellulosic biomass fractionation process consisting of a formic- or acetic acid-reinforced wood autohydrolysis step followed by an ethanol-water treatment was applied to a mixture of Southern hardwood chips. The wood products in the hydrolysate were mostly monomeric xylose, other monomeric sugars, polymeric hemicelluloses, acetic acid, and a relatively small amount of lignin. The second step mostly dissolves sulfur-free lignin, while the fibrous residue consists mainly of cellulose fibers, which may be used for liquid fuels or pulp production. The yield composition, and quality of these products were determined as a function of treatment conditions, with the aim to develop an economic and robust biorefinery fractionation technology.

Keywords


Acetic acid; Biomass; Cellulose; Formic acid; Fractionation; Hardwood; Hemicelluloses; Lignin; Lignocellulose; Xylan

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126