Modification of Bleached Bamboo Fiber using Cationic Guar Gum for Fiberboard

Wenjia Han, Chuanshan Zhao, Qining Sun, Rendang Yang, Dongmei Yu

Abstract


In this work, a biodegradable fiberboard was prepared from modified bleached bamboo fibers. Cationic guar gum (CGG) was deposited onto the fibers, and the corresponding changes in physical properties of the composite were determined. Bleached bamboo fiber was modified by depositing cationic guar gum (CGG) onto the fibers. The treated fibers were then used to prepare biodegradable fiberboard. A 56.21% increase in tensile strength and a 54.40% increase in strain were obtained with the addition of 1.5 wt% of CGG. The bamboo fiber treated with CGG exhibited better thermal stability than the pure bamboo fiber. The surface morphologies of the unmodified and modified samples were analyzed using atomic force microscopy (AFM) in the tapping mode and scanning electron microscopy (SEM), which revealed differences in the fine structure of fibers, showing coarser surfaces spread across the fibers.

Keywords


Bleached bamboo fibers; Cationic guar gum; Modification; Mechanical properties; Morphology

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126