Effects of Lignin Removal on Substrate Enzymatic Hydrolysis of SPORL-high-pH Pretreated Bagasse

Jing Liu, Xiaolin Luo, Shilin Cao, Lihui Chen, Liulian Huang

Abstract


The performance of a process called sulfite pretreatment to overcome recalcitrance of lignocelluloses (SPORL), which was carried out at high pH, was preliminarily investigated as a means of improving bagasse substrate enzymatic digestibility (SED). The lignin removal significantly affected the SED resulting from the SPORL-high-pH treatment. Lignin removal was found to be well-correlated with SED when the Boltzmann function was used to fit the curve. In this fitting curve, SED increased slowly initially and then rose up quickly with lignin removal (from 0% to 10%, and then from 10% to 35%) and finally reached an asymptotic value (80%, based on o.d. glucan in the pretreated substrate). Removing lignin to about 35% to 40% would be sufficient to significantly improve the SED of bagasse to the asymptotic value (80%) during enzymatic hydrolysis, while low cellulase and -glucosidase (15 FPU/g and 22.5 CUB/g o.d. cellulose in the substrate, respectively) were loaded. Furthermore, combining this Boltzmann function and the SPORL-high-pH delignification model would be useful for predicting neutral-sulfite pretreated SED.

Keywords


SPORL-high-pH pretreatment; Substrate enzymatic digestibility (SED); Lignin removal; Accessibility; H-factor

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126