Extraction of Lignin from a Coproduct of the Cellulosic Ethanol Industry and Its Thermal Characterization

Vida Poursorkhabi, Manjusri Misra, Amar K. Mohanty

Abstract


Lignin was extracted from the solid coproduct of a lignocellulosic ethanol production by a solid-liquid extraction method using N,N-dimethyl formamide. This coproduct was the residue of a steam explosion pretreatment followed by enzymatic hydrolysis process. The coproduct was used as received and also after washing. Lignin content of the solid coproduct was reduced from 63% to 43% after lignin extraction. Fourier transform infrared spectroscopy (FTIR), molecular weight measurement (GPC), and elemental analysis provided information about the chemical structure and molecular weight of the fractions. The extracted lignin had lower molecular weight (~ 5000 Da.) and higher carbon content (63%) compared to the residue of extraction (Mw ≈ 8000 Da. and carbon % = 48%). Thermal stability measurements of the samples by thermogravimetry (TGA) showed that the extracted lignin had the highest carbon residue. Effects of different heating cycles on the glass transition temperature (Tg) were measured. The Tg of the soluble fraction was lower than that of the coproduct. Results of the X-ray diffraction (XRD) showed the crystalline structure of cellulose in both the coproduct and the solid residue after extraction. This extraction and material characterization is helpful for liquid processes such as solution spinning or electrospinning. The thermal properties can be used for optimization of heat treatment processes such as carbonization.

Keywords


Solid-liquid extraction of lignin; Enzymatic hydrolysis coproduct; Glass transition temperature; Thermal stability; Steam explosion lignin

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126