Stepwise Isothermal Fast Pyrolysis (SIFP) of Biomass. Part III. SIFP of Olive Oil Industry Wastes

Nadia S. Luna, Patricia López Rivilli, Jorge Daniel Pérez

Abstract


Pyrolysis of olive oil industry wastes was carried out using stepwise isothermal fast pyrolysis (SIFP). SIFP consists of a succession of isothermal fast pyrolysis reactions in which the solid products obtained from the previous isothermal fast pyrolysis reaction become the substrates for subsequent reactions at higher temperatures. This article reports the results obtained from the SIFP of olive oil residue carried out between the temperatures of 300 and 500 °C using 100 °C intervals under reduced pressure (200 mm Hg). The maximum yield of liquid products occurred at 300 °C and consisted of around 35% bio-oil, which contained mainly phenols, furans, and fatty acid methyl esters (FAME). At 400 and 500 °C, FAME, which is derived from residual olive oil, was the major product.

Keywords


Fast pyrolysis; Olive oil residue; Bio-oil; Phenols; Guaiacol; Olive oil FAME

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126