Microstructure Modelling of Silica Bodies from Oil Palm Empty Fruit Bunch (OPEFB) Fibres

Farah Nadia Omar, Mohd Afandi P. Mohammed, Azhari Samsu Baharuddin

Abstract


Investigating the mechanical behaviour of silica bodies in oil palm empty fruit bunches (OPEFB) is important to improve the process of silica body removal. This study will assist in providing an understanding of the role of OPEFB as a bioresource material for the bioconversion process. The microstructure of silica bodies/protrusions on the OPEFB fibre surface was modelled using the finite element method, based on the information obtained from scanning electron microscopy (SEM). The effects of silica body geometry, possible anisotropy/orthotropy, and debonding between the interface of the silica body and OPEFB fibre were investigated. Agreements were observed between the results using both circular and spiked silica body models with different geometries and volume fractions. In addition, the cohesive debonding modelling results showed that once critical stress was activated, the stress-strain curve deviated from the no-debond model. The results also suggested that the value of cohesive energy should be between 0.5 kN/m and 4 kN/m.

Keywords


Oil palm empty fruit bunch; Microstructure modelling; Silica bodies; Cohesive zone modelling

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126