Application of Polyaniline/Clay Combination to Cellulosic Paper as an Approach to Conductivity Development

Chandrasekaran Saravanan, Zhibin He, Yonghao Ni

Abstract


A polyaniline/clay combination was prepared via: 1) mixing polyaniline dispersion with clay; or 2) in situ polymerization of aniline in the presence of clay. To deliver electrical conductivity to cellulosic paper, the polyaniline/clay composition was applied to the paper surface by Meyer rod coating. The conductive paper was analyzed by Scanning Electron microscopy (SEM) and Fourier Transmission Infrared spectroscopy (FT-IR). For comparison purposes, conductive paper was also prepared by in situ polymerization of aniline in the presence of cellulosic fibers. The in-situ formed polyaniline was deposited on the fiber surface, and the polyaniline-deposited cellulosic fibers were made into paper sheets. It was found that at the same aniline content, paper surface coating with polyaniline/clay composition gave a much higher conductivity in comparison with the use of polyaniline-deposited cellulosic fibers for paper sheet formation.

Keywords


Polyaniline; Clay; Coating; Conductive paper; Conductivity; Cellulosic fibers

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126