Microscopic Characterization of Modified Phenol-Formaldehyde Resin Penetration of Bamboo Surfaces and its Effect on Some Properties of Two-Ply Bamboo Bonding Interface

Mingjie Guan, Cheng Yong, Lu Wang

Abstract


The bonding interface between bamboo elements and adhesives is presumed to be significantly influenced by the degree of adhesive penetration into the porous network of interconnected cells of bamboo surfaces. In the study presented here, the average depth and effective depth of phenol-formaldehyde resin (PF) modified by different contents of lower-molecular weight (LMW) PF on bamboo surface were evaluated, making use of fluorescent microscopy characterization. The shear distribution at the bonding interface was measured by means of electronic speckle pattern interferometry (ESPI), along with tensile strength measurements, to determine the shear strain distribution on a macroscopic scale. This research combined macroscopic mechanical properties with microscopic interfacial mechanical properties, and it was found that PF modified with 10% LMW PF performed better than other modified PF. Moreover, it was assumed that the results of this study would influence the choice of bamboo-specific adhesives under different strain conditions.

Keywords


Lower-molecular weight modified phenol-formaldehyde resin; Bamboo; ESPI; Bonding interface

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126