Optimization of Tensile Shear Strength of Linear Mechanically Welded Outer-to-Inner Flattened Moso Bamboo (Phyllostachys pubescens)

Haiyang Zhang, Antonio Pizzi, Xiaoning Lu, Xihe Zhou

Abstract


Mechanical welding technology has been widely employed in the making of bonding joints with wood. Moso bamboo, a lignocellulosic biomaterial, can also be bonded using mechanical welding technology. The surface response methodology was used to define welding parameters yielding optimal joint strength. In the range of this experiment, it was found that the vibration amplitude and the welding pressure both had a significant influence on the performance of the joint, while the welding time did not. The quadratic model was able to significantly fit the actual results and could be used to determine and optimize the bonding strength.

Keywords


Mechanical welding; Moso bamboo; Shear strength; Surface response methodology; Quadratic model

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126