Modification of Hardwood Veneers by Heat Treatment for Enhanced Colors

Sándor Fehér, Szabolcs Komán, Zoltán Börcsök, Róbert Taschner

Abstract


This research involved the most widely used wood-species of veneers in Hungary (oak, ash, beech, cherry, and maple). The resulting changes in color produced at treatment temperatures between 80 and 200 °C in different treatment times were evaluated using the CIELab color stimulus evaluation system. For higher temperature treatments, a tight functional relationship was observed between the treatment time and the difference in color stimulus. Heat treatments within a temperature range above 160 °C produced visually perceptible results, while color change resulting from heat treatments at lower temperatures was almost imperceptible. For higher temperature treatment a tight functional relationship was observed between the difference in color stimulus and treatment time (r2>min. 0.84). Different tree species produced different extents of change in hue depending on the treatment parameters. Among the color components, the perceptible discoloration was mostly produced by the change in the lightness factor (L*). As the treatment temperature rose, the change in the red (a*) and yellow (b*) components was less significant regardless of the species.

Keywords


Veneer; Heat treatment; Color change; Oak; Ash; Beech; Cherry; Maple

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126