Cellulose Esterification with Octanoyl Chloride and its Application to Films and Aerogels

Yandan Zhou, Dou-yong Min, Zhiguo Wang, Yiqin Yang, Shigenori Kuga

Abstract


Homogeneous esterification of cellulose with octanoyl chloride (a long-chain fatty acid) was investigated in lithium chloride/N,N-dimethyl acetamide (LiCl/DMAc) medium. Cellulose was readily esterified by the octanoyl chloride, as shown by 1H NMR analysis. The effects of the ratio of octanoyl chloride to cellulose hydroxyl groups, the reaction temperature, and the reaction time on the yield and degrees of substitution (DS) of cellulose esters (CEs) were investigated. CEs with high DS (2.2) were achieved after 8 h at 100 °C with a 1.6 to 1.8 of molar ratio of octanoyl chloride to cellulose hydroxyl groups. Furthermore, hydrophobic, fully transparent CE films and aerogels were prepared using CE tetrahydrofuran (THF) solutions. The CE aerogels exhibited high porosity and were formed with evenly distributed porosity, as revealed by scanning electron microscopy (SEM).

Keywords


Cellulose; Esterification; Cellulose ester; Cellulose ester film; Cellulose ester aerogel

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126