Effect of Cyclic Loading on the Elasticity of Beech Solid and Laminated Wood

Milan Gaff, Jozef Gáborík

Abstract


This article deals with the determination of the cyclic loading effect on the elastic modulus (Em) of beech solid and laminated wood at various thicknesses while bent in the radial direction. To identify the modulus of elasticity, a three-point static bending test was carried out. The monitored characteristics were compared for the bodies under cyclic stress vs. bodies not subject to cyclic stress. Results showed no significant effect of cyclic loading on the laminated wood elastic modulus values. Conversely, cyclic loading significantly (95% confidence interval) affects the modulus of elasticity values for solid wood. A significant impact of thickness has been observed for both types of material. The results demonstrate that the elastic modulus values decrease with increasing thickness after cyclic loading.

Keywords


Cyclic loading; Laminated wood; Bending strength; Elastic modulus

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126