How Planer Settings Affect Timber Properties

Ann Axelsson

Abstract


There are different reasons for planing timber. One is to adjust the cross-sectional dimensions of thickness and width. Another is to adjust the timber's outer shape, usually in order to reduce warp resulting from drying and having the forms of cup, twist, bow, and crook. The end-result depends on the properties of the timber before planing and on the planer design and settings. In the present work it was found that increasing or decreasing the forces exerted on the timber by a four-sided planer does not affect the cutting depth or the twist reduction. The pressure settings do not affect the rectangularity or the amount of unplaned areas on the surfaces either. The possibility to impact the result with this type of planer, apart from the cutting depth and planed dimensions, is slim to none.

Keywords


Drying deformation; Planer misses; Planer settings: Planing and milling rectangularity; Warp; Wood; Wood quality

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126