The Effect of Joint Form and Parameter Values on Mechanical Properties of Bamboo-Bundle Laminated Veneer Lumber (BLVL)

Jianchao Deng, Haidong Li, Dan Zhang, Fuming Chen, Ge Wang, Haitao Cheng

Abstract


Bamboo-bundle laminated veneer lumber (BLVL) was produced by joint lengthening technology. The objective of this study was to evaluate the effect of joint form and the values of key parameters on mechanical properties of BLVL. Two joint forms, i.e., finger joint and scarf joint, and two corresponding joint parameters, i.e., finger length and scarf angle, were investigated in laminates. The results indicated that the mechanical properties of jointed BLVL were reduced in comparison to those of BLVL without joints. For finger-joint form, the BLVL member with 14 mm fingers achieved better compressive strength, bending modulus of rupture (MOR), and tensile strength than 19 and 25 mm ones. For scarf-joint form, the 30° scarf-jointed member exhibited the highest bending modulus and tensile modulus of rupture (MOR) in this study, then followed the 45° and 60° ones. The 60° scarf-jointed BLVLs were better than 30° and 45° groups in compression strength. Synthesis of the testing results revealed that finger-jointed BLVLs achieved better bending modulus of rupture than scarf-jointed ones.

Keywords


Bamboo-bundle laminated veneer lumber; Joint; Finger length; Scarf angle; Bending properties; Tensile properties; Compression properties

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126