Wettability of Sanded and Aged Fast-growing Poplar Wood Surfaces: II. Dynamic Wetting Models

Zhiyong Qin, Qian Zhang, Qiang Gao, Shifeng Zhang, Jianzhang Li

Abstract


The dynamic wettability of adhesive on sanded and aged wood surfaces was measured using the sessile drop method. Four different models were used to evaluate and compare the wetting process. It was shown that the wettability of freshly sanded wood and aged wood both decreased compared to the control wood. There was no evidence of change in wettability with increasing grit number. Aging reduced the wettability of the wood surface. The coefficients of determination (R2) for all four models were over 90%, and that of the Modified model was 99%. The models can be used to accurately describe the adhesive wetting process. The wettability of water and adhesive on the fresh surface were different, and the wettability of the adhesive increased as grit number increased. On the contrary, the wettability of water decreased as grit number increased, and the same trend was found for the water and the adhesive on the aged wood surface. Advantages and disadvantages were found for each model, but the Modified model needs to be verified by additional experiments.

Keywords


Poplar wood; Sanding; Contact angle; Wettability; Models

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126