Analysis of Sanding Parameters, Sanding Force, Normal Force, Power Consumption, and Surface Roughness in Sanding Wood-Based Panels

Bin Luo, Li Li, Hongguang Liu, Meijun Xu, Fangru Xing

Abstract


The proper parameters of sanding with an abrasive sanding machine are significant to reduce energy consumption and to improve processing efficiency and quality. The influences of grit size (G), feed speed (U), sanding speed (V), and sanding thickness (Ts) on the sanding force (sF), normal force (nF), arithmetic mean deviation of profile (Ra), power consumption (P), and power efficiency (ε) were analyzed by the orthogonal method in this study. Fuzzy synthetic evaluation (FSE) was adopted to evaluate sF, P, and Ra comprehensively and to determine the optimum sanding parameters. For both medium density fiberboard (MDF) and particle board (PB), G has the greatest impact on Ra. For MDF, Ts and G have great impacts on sF, G is also the significant factor affecting nF, whereas the significant factors affecting P are U and V. For PB, G, U, and Ts have great impacts on sF, while G and Ts are the significant factors for nF. Significant factors for P are V and Ts. For MDF and PB, when the weight vector (sF, Ra) is (0.3, 0.7), the optimum schemes are G80U3m/minV8.04,9.38,10.74m/sTs0.2,0.3mm and G80U3m/minV9.38m/sTs0.2 mm, respectively, and when (sF, Ra) is (0.7, 0.3), the optimum schemes are G80U3,3.72m/minV6.69,8.04,9.38m/sTs0.2 mm and G80U3m/minV8.04,9.38m/sTs0.2 mm, respectively. Additionally, when the weight vector (P, Ra) is (0.3, 0.7) or (0.7, 0.3), the optimum scheme is G100U2.52m/minV5.35m/sTs0.1 mm.

Keywords


Medium density fiberboard; Normal force; Particleboard; Power efficiency; Sanding force; Sanding parameter; Surface roughness

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126