Effect of Cyclic Loading on Modulus of Elasticity of Aspen Wood

Milan Gaff, Miroslav Gašparík

Abstract


This article investigates the modulus of elasticity of solid and laminated aspen wood of various thicknesses after cyclic loading. A three-point static bending test was carried out to determine the modulus of elasticity. Cyclically loaded samples were compared with samples without cyclic loading. For the laminated wood, the results demonstrated a statistically significant impact of cyclic loading on the elasticity modulus. In contrast, no significant impact of cyclic loading was shown for the solid wood. The impact of the number of cycles was significant for both laminated and solid wood. When this number increased, the elasticity modulus values decreased. Generally, higher elasticity modulus values were confirmed for the laminated wood.

Keywords


Cyclic loading; Laminated wood; Modulus of elasticity; Aspen; Number of cycles

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126