Preparation of Dissolving Pulp Made from Poplar Residual Slabs and Effect of Xylanase Post-treatment on Its Reactivity

Chaojun Wu, Lijuan Bing, Dongmei Yu, Ronggang Li, Shufang Zhou


The production of dissolving pulp from poplar wood residual slabs was investigated. The residual slab chips were initially prehydrolyzed and subsequently pulped by the kraft process; the resulting brownstock was bleached using a totally chlorine-free (TCF) sequence to full brightness. The pulp contained low pentosans and high α-cellulose content, and the pulp had high reactivity. Its hemicellulose content, reactivity, and degree of polymerization were within acceptable levels for a rayon-grade dissolving pulp. Thus, the residual slabs from poplar can be regarded as a viable raw material for dissolving pulp production. The reactivity of this dissolving pulp was drastically decreased after the xylanase post-treatment, which can slightly lower the pentosans levels. Simultaneously, the crystallinity index of the resulting pulp obviously decreased after xylanase post-treatment.


Pre-hydrolysis; Kraft cooking; TCF bleaching; Poplar residual slab; Dissolving pulp; Xylanase

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022,; Lucian A. Lucia, (919) 515-7707, URLs:; ISSN: 1930-2126