Evaluation of Dynamic Modulus of Elasticity of Medium Density Fiberboard Panel from Longitudinal Vibration Tests on Specimens

Parinaz Mirbolouk, Mehran Roohnia

Abstract


It is preferred to perform conformity assessment of wood-based panels on the whole panel without cutting it down to smaller pieces. The modulus of elasticity, a mechanical property of wood, was determined by longitudinal vibration testing with the full-size panel, and the results were compared with results of tests of prismatic beams. The Brancheriau’s correction coefficient was used to compensate for errors from cross-sectional dimension variations and errors from Poisson’s ratio. Longitudinal excitation of the panels along the length was shown to be successful in evaluating the modulus of elasticity. However, strong correlations obtained from plate and beam comparisons along the width of the panels are promising.

Keywords


Composite; Longitudinal vibration; MDF; NDT; Plate; Wood

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126