Preparation of Pinewood- and Wheat Straw-based Activated Carbon via a Microwave-assisted Potassium Hydroxide Treatment and an Analysis of the Effects of the Microwave Activation Conditions

Haiyan Mao, Dingguo Zhou, Zaher Hashisho, Sunguo Wang, Heng Chen, Haiyan (Helena) Wang


This study explored the effect of activated carbon preparation conditions on their adsorption performance. Pinewood and wheat straw were used as source materials to prepare activated carbon via a fast activation process using KOH and microwave heating. The iodine numbers and carbon yields were determined to evaluate the adsorption properties of the activated carbon. The effects of various KOH/char mass ratios, particle sizes, humidity levels, and microwave heating times on the physical characteristics of the activated carbon were investigated. The iodine number and yield and SEM images were used to characterize the activated carbon. Small particle sizes, the presence of humidity in the purge gas, and high KOH/char ratios resulted in higher iodine numbers. The best activated carbons were obtained using a KOH/char ratio of 3.0, a microwave power of 600 W, a radiation time of 30 min, and a particle size of 0.1 to 0.42 mm in a humid environment; these carbons showed iodine numbers of 2208 mg/g (pinewood activated carbon) and 1420 mg/g (wheat straw activated carbon), with carbon yields of 73% and 52%, respectively. Longer microwave heating times increased the iodine number. The iodine numbers and yields of the pinewood activated carbons were much higher than those of their wheat straw counterparts.


Activated carbon; Microwave heating; Chemical activation; Iodine number

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022,; Lucian A. Lucia, (919) 515-7707, URLs:; ISSN: 1930-2126