Effect of the Starch Source on the Performance of Cationic Starches having Similar Degree of Substitution for Papermaking using Deinked Pulp

Jin Liu, Rendang Yang, Fei Yang


Cationic waxy corn starch was prepared from waxy corn starch with 2,3-epoxypropyl trimethyl ammonium chloride (ETMAC) as a cationic etherifying reagent. Its structure was identified by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and X-ray powder diffraction (XRD). The results showed that quaternary ammonium groups were introduced successfully into the waxy corn starch, and the cationic reaction occurred on the surface of the starch granules. Cationic waxy corn starch was then applied into deinked pulp as a paper reinforcer, and the result was compared with that of cationic tapioca starch and cationic maize starch. In general, the physical strengths of the paper were improved significantly with an increasing dosage of cationic starches. Cationic waxy corn starch was superior in terms of enhancing the physical properties of paper. In addition, with the use of cationic waxy corn starch, anionic trash in the slurry could be better removed.


Waxy corn starch; Cationization; Deinked pulp

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126