Effect of Pressure, Feed Rate, and Abrasive Mass Flow Rate on Water Jet Cutting Efficiency When Cutting Recombinant Bamboo

Rongrong Li, Mats Ekevad, Xiaolei Guo, Jianwen Ding, Pingxiang Cao

Abstract


The impact of varying pressure, feed rate, and abrasive mass flow rate on the efficiency of an abrasive water jet cutting process was studied in this work. Recombinant bamboo samples with thicknesses of 5, 10, and 15 mm were cut by the abrasive water jet. The upper kerf width, lower kerf width, and the ratio of the upper kerf width to lower kerf width were chosen as the efficiency parameters. Mathematical models were developed to describe the relationship between the input process parameters and the efficiency parameters. The arrangement of experiments and analysis of results were performed based on response surface methodology. The evaluated model yielded predictions in agreement with experimental results.

Keywords


Recombinant bamboo; Response surface methodology; Abrasive water jet; Kerf width

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126