High-pressure Treatment of DMAc/LiCl Swollen Softwood Pulp

Jasmina Obradovic, Pedro Fardim, Lippo Lassila, Patrick Navard, Dennis Kronlund

Abstract


Swollen softwood cellulose pulp in a DMAc/LiCl solvent system was compressed under elevated pressure (up to 900 MPa) in a Bridgman anvil press. The influence of high pressure on two cellulose systems was studied by measuring X-ray diffraction, mechanical and optical properties and observing scanning electron micrographs of the morphology. Compressed swollen cellulose, washed with distilled water, had lower elastic modulus and hardness compared to swollen cellulose washed with a combination of 2-propanol and deionized water. This work showed that material with lower mechanical properties will be affected more by compression and will result in higher mechanical properties after pressure treatment. Transmitted light in the visible range for both systems was increased after elevated pressure was applied. The XRD measurements revealed the decrease of the cellulose crystallinity after high pressure treatment for all swollen cellulose samples. The morphology of the compacted samples showed noticeable differences between the compact smooth surface and the layered core.

Keywords


Cellulose; Compression moulding; High-pressure; N,N-dimethylacetamide; Swelling; Mechanical properties; Optical properties

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126