Effect of Melamine Allocation Proportion on Chemical Structures and Properties of Melamine-Urea-Formaldehyde Resins

Jianlin Luo, Jizhi Zhang, Jing Luo, Jianzhang Li, Qiang Gao

Abstract


Melamine-urea-formaldehyde (MUF) resin was synthesized by adding melamine with a first and second portion of urea, named M1 and M2, respectively. Different allocation proportions of M1:M2 (4:0, 3:1, 2:2, 1:3, and 0:4) were used to develop five MUF (MUF-1, 2, 3, 4, and 5) resins with an F/(U+M) molar ratio of 1.05. The chemical structures, curing behaviors, and cross-section morphology of the resins were characterized. Three-ply plywood was fabricated to evaluate wet shear strength and formaldehyde emission. Results showed that when the melamine allocation proportion was increased from 0:4 to 4:0, the total methylene ether group content increased, the curing rate was elevated, and a heterogeneous cross-section of the cured resin formed, which led to a wet shear strength increase of 42.11%. When the melamine allocation proportion decreased, the free melamine content increased, the pot life was prolonged, and a highly homogeneous morphology was formed, which resulted in a decrease of 42.86% in formaldehyde emission of the resulting plywood. These results suggested that a high melamine allocation proportion, meaning that more of the MUF resin was added initially, improved the water resistance of the resulting resin, whereas a low melamine allocation proportion decreased the formaldehyde emission reduction of the resulting plywood.

Keywords


MUF resin; Melamine allocation proportion; Chemical structures and properties

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126