Impact of Causticizing Calcium Carbonate from Soda Pulping of Wheat Straw on AKD Sizing

Xinxing Xia, Xing Wang, Shuhua Tong, Zhibin He

Abstract


The causticizing calcium carbonate (CCC) produced in the causticizing stage of the chemical recovery process in alkaline pulping of wheat straw has a high silicate content and is difficult to convert to calcium oxide in the lime kiln. The CCC can be utilized as a paper filler to avoid costly lime re-burning, but the silicate content of the CCC can have a negative impact on the wet-end chemistry of the papermaking process. In this paper, the effect of the silicate content of the CCC filler on AKD sizing was investigated. CCC fillers of various silicate contents were prepared in the lab by causticizing green liquor from the soda pulping of wheat straw and were added to fiber suspensions at the wet end of the papermaking process. The results show that the impact of the CCC filler on AKD sizing was associated with its silicate content. As the silicate content increased, the specific surface area and negative charge density of the CCC particles markedly increased, resulting in more AKD adsorption onto the CCC particles instead of fibers.

Keywords


Causticizing calcium carbonate; Silicate; Silica; Straw soda pulping; AKD sizing; Specific surface area; Charge density

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126