Demonstration of Strength Development in Initial Wet Paper Web using Field Emission-Scanning Electron Microscopy (FE-SEM)

Jürgen Belle, Stephan Kleemann, Jürgen Odermatt, Andrea Olbrich

Abstract


Various models exist that explain strength development in the wet web. Furthermore the scanning electron microscope (SEM) has been used in the paper industry to characterise cellulosic fibres and paper. The documentation of the initial wet web properties needs very specific requirements for sample preparation. An SEM image shows the sample´s surface, so the wet sample’s water film would cover all fine fibre structures. For this reason the samples must be dried prior to analysis. Freeze drying is a common method that is described to prepare samples for characterisation of single fibres before and after mechanical treatment. In this investigation the structure of the initial wet web was physically fixed by rapid freezing, followed by freeze drying. Afterwards, the samples were analyzed by Field Emission SEM (FE-SEM). The generated images support the hypothesis that fibrils partially extend themselves from the fibre and interact with adjacent fibres.

Keywords


Dryness; Fibre collapse; Form fit; Hornification; Initial wet web strength

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126