Analysis of Usability in Furniture Production of Wood Plastic Laminated Board

Abdullah Cemil Ilçe, Mehmet Budakçı, Serkan Özdemir, Memiş Akkuş

Abstract


The objective of this study was to manufacture a lightweight and easily producible wood plastic laminate (WPL) board that could be used in the furniture sector. Eastern beech (Fagus orientalis L.) veneer papels (A) and hollow polycarbonate boards (B), both with a thickness of 4 mm, were laminated in different combinations using polyurethane (PUR) and polychloroprene (PCR) adhesives. The physical and mechanical properties of the WPL boards obtained were determined according to the principles specified in the EN 326-1, EN 317, EN 310, ASTM D1037, and ASTM D1761 standards. Subsequently, the specimens were compared with particle boards (PB), medium density fiberboards (MDF), and okoume plywoods (PW). According to the results, the AABAA, ABABA, and ABBBA combinations of the WPL materials had better physical properties, such as weight, water absorption, and swelling thickness, compared to the other composites. Furthermore, because the WPL materials had a high bending resistance, modulus of elasticity, and nail and screw withdrawal strength, they could be used instead of PB and MDF. The WPL material obtained within the scope of this study are suitable for furniture making.

Keywords


Wood plastic; Composite material; Furniture production; Physical mechanical properties

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126