Tensile Properties of Polypropylene Composites Reinforced with Mechanical, Thermomechanical, and Chemi-Thermomechanical Pulps from Orange Pruning

Rafel Reixach, Francesc X. Espinach, Gerard Arbat, Fernando Julián, Marc Delgado-Aguilar, Josep Puig, Pere Mutjé

Abstract


This paper explores the evolution in the tensile strength of orange pruning fiber-reinforced polypropylene composites. The exploitation of these pruning’s can effectively avoid incineration, with the consequence of CO2 emissions and fire risk, while extending the value chain of the agricultural industry. This biomass was subjected to three different treatments yielding mechanical, thermomechanical, and chemi-thermomechanical pulps. It was found that 20 to 50% of these pulps, together with a coupling agent, were used as polypropylene reinforcement. The evolution in the tensile strength and morphological properties of the fibers, and the effect of treatments on these properties were analyzed. A modified rule of mixtures (mROM) was used to analyze the micromechanical properties of the interface. In addition, the mechanical properties were weighted against the fiber treatment yields. Finally, factors to compute the net contribution of the fibers to the final strength of the composite materials were proposed.

Keywords


Composite materials; Tensile properties; Green composites; Pruning recovery

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126