Effects of Sequencing Enzyme Application and Refining on DIP Properties Produced From Mixed Office Waste Paper

Mohammad Ali Hossein, Mohammad Talaeipour, AmirHooman Hemmasi, Behzad Bazyar, Saeed Mahdavi

Abstract


The effect of changing the sequence of refining and enzymatic treatment on the properties of deinked pulp from mixed office waste paper (MOW) was investigated. The sequences included refining before and after enzymatic treatment. Refining was applied for 700 and 1500 revolutions, and the consistency of pulps during enzymatic treatment was 5, 8, and 13%. Enzymatic treatment was applied for 20, 40, and 60 min. After each of the sequences, the deinking stage was the same. When refining was applied after the enzymatic treatment, the freeness of pulp was greater than that of the pulp on which refining was conducted before the enzymatic treatment, at a constant refining speed. Better strength properties were produced when refining was carried out before the enzymatic treatment. Also, the results of testing the optical properties of deinked pulp showed that brightness and ERIC improved when refining was carried out before the enzymatic treatment.

Keywords


Cellulase; Refining; Deinking; ERIC; MOW; Optical properties

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126