Modified PCC used in Papermaking Processes

Hua Chen, Yan Zhang, Qi zhong Wo, Fei Yang, Jianhua Wang, Yan Guo, Qinyao Zheng

Abstract


Alkylketene dimer (AKD), cationic starch (CS), and polyamide epichlorohydrin (PAE) were used in the modification of precipitated calcium carbonate (PCC), and the use of the modified PCC in papermaking was investigated. It was found that after the PCC was modified, the sizing effectiveness of AKD was enhanced; when PAE was added to the filler, it had better modified effects than when CS was added. When the addition of PCC and AKD were fixed at 20% and 1% (based on the dry weight of PCC), respectively, the retention of PCC increased from 42.5% to 54.6% when modified by 5% CS, and to 56.7% when modified by 2% PAE. The strength properties (tensile indices, burst indices, and tear indices), opacity, and air permeability of the filled paper were strikingly enhanced, while the brightness was slightly negatively influenced by the addition of PAE. The results indicate that the pre-blend modified method is a promising technique for papermaking in that it enhanced the properties of paper.

Keywords


Polyamide polyamine epichlorohydrin; Cationic starch; Precipitated calcium carbonate; Modification; Papermaking

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126