Steam Explosion and Alkali-Oxygen Combined Effect for Degumming of Kenaf Fiber

Shengchuan Gao, Guangting Han, Wei Jiang, Yuanming Zhang, Xiao Zhang

Abstract


Kenaf is an economically viable and ecologically friendly cellulose source. It can be used in the textile, paper, and bio-energy industries, but it has not been effectively developed and utilized because of degumming problems. To effectively take advantage of kenaf resources, to satisfy the growing demand for natural fiber, and to provide support for other fiber material degumming, steam explosion (STEX) pretreatment followed by alkali-oxygen treatment was studied. The effect of pressure on the properties of kenaf during the STEX treatment was studied, and the optimal degumming process for kenaf was selected. Results showed that STEX pretreatment removed pectin and part of the hemicellulose. Carbohydrates (cellulose and hemicellulose) could be degraded via high pressure treatment. The residual gum content and the fineness of the kenaf fiber after the alkali-oxygen treatment were good enough for textile production. High pressure was found not to be a key factor influencing the degumming process. Low pressure STEX (0.5 MPa) and alkali-oxygen treatment was judged to be an efficient method for degumming kenaf fibers.

Keywords


Kenaf fiber; Steam explosion; Degumming; Cellulose

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126