Effects of Machining Methods on the Surface Roughness Values of Pinus nigra Arnold Wood

Murat Kılıç

Abstract


In this study, samples were subjected to the following surface treatment techniques: sawing with a circular saw, planing with a thickness machine, and sanding with a sanding machine (with No. 80 sandpaper). After samples were treated radially and tangentially with machines, their surface roughness values (Ra, Ry, and Rz) were measured according to ISO 4288. When statistics related to surface roughness values (for Ra, Ry, and Rz) were analyzed, it was found that surfaces processed with the thickness machine exhibited the smoothest surfaces. Also, according to the same statistical tables, the lowest surface roughness values were found for surfaces cut tangentially.

Keywords


Surface roughness; Pinus nigra Arnold wood; Wood machining; Cutting directions

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126