Dynamic Young’s Modulus of Scarf- and Finger-Jointed Beams using Longitudinal Vibration Method

Ali Yavari, Amirhooman Hemmasi, Mehran Roohnia, Róbert Marušák

Abstract


The elastic properties of oak wood (solid wood, scarf-jointed beams, and finger-jointed beams) and two different, independently applied adhesives (polyvinyl acetate and isocyanate) were investigated. Using a longitudinal vibration technique and comparing the elastic modulus of the solid wood and jointed beams, it was revealed that longer fingers (10 mm) in the finger joints and larger angle joints (70° and 75°) in the scarf-jointed beams enhanced the elastic properties of the beams. Based on these findings, it was concluded that these configurations result in elastic properties that are most similar to those of solid wood. The application of polyvinyl acetate rather than isocyanate significantly (P < 0.05) improved the elastic properties of the joints (both scarf- and finger-jointed beams).

Keywords


Modulus of elasticity; Scarf joint; Finger joint; Longitudinal vibration; Polyvinyl acetate; Isocyanate

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126