Factors Influencing the Charring Rate of Chinese Wood by using the Cone Calorimeter

Liulai Wen, Liuyang Han, Haibin Zhou

Abstract


Wood has better load-bearing capacity following the formation of a char layer when exposed to fire. The charring rate is the most important property of wood with respect to its fire resistance and fire integrity. The objectives of this study were to determine the effects of factors, including density, gas permeability, ring width, grain orientation, and heat flux, on the charring rate. The charring rates of six Chinese woods were tested with a cone calorimeter with densities of 0.35 to 0.69 g/cm3 and moisture contents of approximately 12%. The results indicated that density, gas permeability, and heat flux, but not the grain orientation, significantly affected the charring rate. There was a positive, linear correlation between the heat flux and the charring rate. The density was nearly linearly related to the charring rate for either softwood or hardwood; the correlation was not found for all woods. The positive, linear correlation between the gas permeability and the charring rate was only found along the grain.

Keywords


Charring rate; Density; Gas permeability; Cone Calorimeter

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126