Detecting Longitudinal Position of Internal Log Hole Using an Impact-Echo Method

Hailin Feng, Yiming Fang, Jian Li, Guanghui Li

Abstract


This paper presents a new methodology for detecting the longitudinal location of the hidden hole in a log using impact-echo testing. The hole and the end surface of the log produced two different amplitude peaks in the frequency spectrum after a mechanical tap on the top of the log. The ratio of the two frequencies was used to estimate the longitudinal position of the hole. The major advantage of this method is that it avoids measuring the travel velocity of the stress wave, which is sensitive to many factors and then poses a formidable challenge to the realization of inspection. Experimental studies were carried out using Pine logs with mechanically drilled holes and a Cinnamomum camphora log with natural hole. The results indicated that the estimated positions were in good agreement with the actual position of the hole. The impact-echo testing can be applied to detect the longitudinal position of the internal hole in log.

Keywords


Non-destructive testing; Log; Internal hole detection; Longitudinal position determination; Impact-echo testing

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126