Properties and Combustion Characteristics of Molded Solid Fuel Particles Prepared by Pyrolytic Gasification or Sawdust Carbonized Carbon

Bingliang Zhou, Jianbin Zhou, Qisheng Zhang, Dengyu Chen, Xiujuan Liu, Lian Wang, Ruoyu Ji, Huanhuan Ma

Abstract


Pyrolytic gasified charcoal (PGC) and tar are the solid and liquid products, respectively, yielded from biomass gasification technology. In this paper, PGC was molded with adhesives to prepare molded solid fuel (MSF). Tar and PGC were obtained from the pyrolytic gasification of wood chips and sawdust from pine and cedarwood. PGC was molded with phenol resin prepared by wood tar to prepare MSF (MSF-MP). Meanwhile, there were two other methods used to prepare MSF. PGC molded with common phenol resin was one method (MSF-P). PGC was molded with starch adhesive to prepare MSF-S. Wood powder carbonized carbon (WPCC) obtained from the marketplace was employed as a trial sample. The properties and combustion characteristics of MSFs and WPCC were studied. It was found that the shatter strength of these MSFs were more than 95%. MSFs had higher activation energy and comprehensive combustion index compared to WPCC. MSF-MP yielded the following data: shatter strength: 95.86%, lower heating value (LHV): 25.89 MJ∙kg-1, ignition: 325 °C, comprehensive combustion index: 1.73×10-10, and activation energy: 61.38 kJ∙mol-1. The LHV and activation energy of MSF-MP were superior to those of other MSFs. Therefore, MSF-MP has a market potential for use as barbecue charcoal in restaurant or family gatherings. The preparation of MSF-MP is a prospective method for the utilization of PGC and wood tar.

Keywords


Pyrolytic Gasified Charcoal; Wood Tar; Adhesive; TGA; Combustion Characteristic

Full Text: PDF

Welcome to BioResources! This online, peer-reviewed journal is devoted to the science and engineering of biomaterials and chemicals from lignocellulosic sources for new end uses and new capabilities. The editors of BioResources would be very happy to assist you during the process of submitting or reviewing articles. Please note that logging in is required in order to submit or review articles. Martin A. Hubbe, (919) 513-3022, hubbe@ncsu.edu; Lucian A. Lucia, (919) 515-7707, lucian.lucia@gmail.com URLs: bioresourcesjournal.com; http://ncsu.edu/bioresources ISSN: 1930-2126